Preparation For Installing LED Underground Light

LED Underground Light is a special landscape light that places the light source underground. It can be seen everywhere in the current urban lighting project, and it is used as a guide light on both sides of the road in the park or as a parking lot. The LED buried lamp is different from the LED lamp wall, LED projection lamp, LED point light source and other LED lamp installation features, so that the LED underground lamp needs to pay attention to preparation work during installation.

LED underground light is electrosprayed, thermostatically cured, and strong adhesion. Generally have good waterproof and dustproof. Before proceeding with the installation work, it should be prepared in several ways:

1. Before installing the LED underground light, the power must be cut off first. This is the first step in the installation of all electrical equipment and is the basis for safe operation.

2. Before installing the LED underground lamp, the various components used in the lamp should be arranged first. The LED underground light is a special landscape LED light that is buried underground. Once installed, it is very troublesome to install parts and refill it. So be prepared before installation.

3. Before installing the LED buried lamp, first dig a hole according to the size of the embedded part, and then fix the embedded part with concrete. The embedded part serves to isolate the LED from the main body of the lamp and the soil, and can ensure the service life of the LED buried lamp.

4. Before installing the LED underground lamp, you should have an IP67 or IP68 wiring device for connecting the external power input to the power cable of the lamp body. Moreover, the power cord of the LED buried lamp requires a VDE-certified waterproof power cord to ensure the service life of the LED buried lamp.

We are LED Underground Light Supplier, if you are interested in our LED Underground Lamp, you can contact us.